.png?imageView2/2/format/jp2)
English
简体中文
Bite Type Tube Fittings Manufacturers introduce the types of fittings for metal hoses:
1. DPJ connection type, also known as DPJ external thread end connection type metal hose joint, is an end connection type, which is used to connect the metal hose to the linear connector on the box.
2. DKJ ferrule type metal hose joint, which is ferrule type, is used to connect the metal hose to the unthreaded steel pipe. It can connect the unthreaded steel pipe and the hose, and the threading process is omitted. Just screw in the screw.
3. DGJ self-fixing metal hose joint is a self-fixing hose joint, which is used to connect the metal hose to the unthreaded steel pipe or the unthreaded equipment outlet, eliminating the need for the threading process.
4. The 90-degree elbow joint follows the inch thread standard. Parts A, C, and F are made of high-quality steel, and part D is made of iron sheet die-casting. The color is silver-white metallic, and the working temperature is between -40 degrees and 100 degrees.
5. Y-shaped three-way metal hose connector, which is in the form of one end of the connector connected to the thin steel wire tube, and the other end of the metal connector connected to the metal hose.
6. The T-shaped three-way metal hose connector is the same as the Y-shaped three-way metal hose connector. Its form is that one end of the connector is connected to the thin steel wire tube, and the other end of the metal connector is connected to the metal hose.
7. The stainless steel hose joint adopts the end connection type, which is cast from standard stainless steel. Its structure is tight, the strength is high, and the connection with the hose is reliable.
