Four connection methods of Stainless Steel Hose Fittings:
1. Short-term connection: through the first stage internal and external pipe screw pattern. In order to increase the tightness of the metal hose connection, a layer of the ejector is usually applied to the externally threaded pipe before the connection. The wound method is to press in the opposite direction so that when the metal hose is tightened, it will not fall off, but it will be tenser. Please note that under high temperature, the high-pressure water vapor system should not be entangled, because high temperature will burn cannabis, causing the metal hose to buckle and ventilate.
2. Filament connection: The filament and the live connector are active accessories on the pipeline, which are usually installed in the equipment, and the lossy member or the long wire is removed. Because the filament connection is easy to repair equipment or replace parts.
3. Movable joint: The on-site joint of the metal hose is composed of three members of the public, mothers, and parents. The male mother is inserted and a gasket is inserted in the middle.
4. Lock female connection: It is a kind of cordial form, belonging to the eight-door door of sanitary appliances, locking the wound with asbestos rope or rubber ring. Stainless steel metal hoses should use pipes or chain clamps based on the diameter size.