.png?imageView2/2/format/jp2)
English
简体中文
Hollow Hex Plug Suppliers introduces the installation arrangement of stainless steel elbows.
The bolts of the stainless steel elbow valve packing gland need to be tightened evenly and cannot be pressed into a skewed state to prevent damage to the valve stem from obstructing and leaking. When using stainless steel elbows, be sure to keep them clean, and the threads of the transmission must be regularly lubricated. If a fault is found, it needs to be stopped immediately and put into use after the cause is found out and the fault is cleared.
When installing, you can install the stainless steel elbow directly on the pipeline according to the connection method, and install it according to the location of use. Under normal circumstances, it can be installed on any position of the pipeline, but due to the need to facilitate the inspection operation, it should be noted that the flow direction of the stainless steel elbow is six upwards from the bottom of the valve disc, so the stainless steel elbow can only be horizontal installation. When installing stainless steel elbows, you need to pay attention to its sealing performance to prevent leakage, which will affect the normal operation of the pipeline.
