A rubber hose is a kind of pipe with excellent performance. It has always occupied a pivotal position in the market. but. Although his performance is quite excellent. However, there are still some problems in the use process that are unavoidable and require special attention. Below, Hose Fittings And Adapters Factory introduce the maintenance skills of rubber hoses:
2. The rubber hose has a certain degree of shrinkage. Its size will increase or decrease with the pressure inside the hose. Therefore, when using it, you can cut the hose to the ratio you need to use a slightly longer length. In this way, the rubber hose can ensure normal use even if it becomes larger or smaller during use. In use. If it is necessary to increase the pressure inside the rubber hose. Note that this use should be as slow as possible to open and close the valve, so as to reduce the adverse effects on the product due to stamping.
3. When using metal powder or particles. It may cause different degrees of damage to the rubber hose. Therefore, please pay attention to enlarge the radius of the rubber hose as much as possible at this time. The damaging problem can be slightly alleviated. If it is used near metal parts, the rubber hose is used. Don't let him bend too much. What needs to be reminded in particular is. Rubber hose will burn because of its characteristics. Therefore, be careful not to touch any flame or fire source when using it. Ensure the safety of use.