Hydraulic Fittings Company introduced that in the whole process of installing the metal hose, thinking about the problem of using a ruler to measure the length of the metal hose according to the final result of the measurement and then implementing the installation may harm the production speed. Some foreign manufacturers immediately install the ruler. On the metal hose, cut the ruler off after installation. Generally speaking, metal hoses can be divided into three lengths:
The first is to reduce the length, that is, the length of the metal hose when it is reduced to the upper limit;
The second is according to the length, which is also the length of the plastic hose when it is in the half-middle waist position of one-half of the larger offset;
The third is the stretch length, which is the length of the plastic hose when it is stretched to a large extent.
However, if they cannot be installed accurately, it will reduce their survival period, resulting in the consumption of large and small batches. The scope of application of metal hoses: conveying pipelines that require sufficient flexibility to prevent small local pipelines from shaking, and are used for steam, liquefied petroleum gas, gas, fuel oil, natural materials, and chemical types. In the case of installation in this location, the plastic hose is subjected to radial load.
There can be 2 moving directions during loading, otherwise, if it is only moved in one direction, it may damage the compressive strength of the metal hose and reduce the life of the application. The metal hose can be installed without the risk of water, and can also be installed vertically or diagonally. The ideal situation is vertical installation. At the same time, it should be avoided to install near the wheel, and the partition can be modified if it is indispensable.
When installing the metal hose, the plastic hose should be placed in the half-middle part, which is often referred to as the installation length. The main products of Shanghai Songxia Electromechanical Co., Ltd. include metal pipe fittings, hose joints, corrugated pipes, plastic-coated pipes, steel drag chains, and other machine tool accessories. Commodities are widely used in engineering construction, CNC lathes, railway lines, chemical plants, supervision, decoration, architectural decoration design, decoration Building materials, decoration, and other fields.