Bsp Thread Fittings company introduced that hydraulic hoses are the lifeline of most construction equipment. Nothing can end the team’s productivity faster than a hose being punctured or bursting. When you spend time monitoring the condition of hydraulic hoses and fittings, you can significantly reduce the number of failures encountered in production. The potential cost of hose failure can result in significant production losses. A hose failure can also have a negative impact on the environment and may cause injury. Because of these problems, it is important to take the necessary precautions to ensure that the hose is replaced in time. Regular inspection of the hose allows you to spot any problems with the hose before it causes production loss or injury. Preventive maintenance Scheduling hose replacement during machine service maintenance or inspection can prevent additional downtime and cost increases.

Hoses should be included in your team’s preventive maintenance plan, especially hoses that are key components of the equipment. Over time, you will start to notice cracks around the joints, which indicates that it is time to replace the hose. You can compare hydraulic hoses with vehicle tires. After a few years, the tires will begin to wear out, which will cause the need to be replaced. A unique and comprehensive inspection is required. During the inspection, if you do not find any signs of wear, you will have no reason to replace it. However, some factors may cause some team leaders to decide to replace the hose assembly. One of the factors that can cause hose replacement even if there are no signs of leakage is the cost of long downtime of one or more machines.

Wear is usually caused by the close connection of components and friction with other outer surfaces. Wear-resistant hose sleeves and sleeves can be used to strengthen the protection of wires. Without proper coverage, the wires will be exposed to external sources. Abrasion can also cause wire breakage, and due to surrounding environmental conditions, this usually leads to corrosion. Hydraulic sleeves and covers are used to protect hoses from wear, erosion, and other factors. If the hose is contained in the original assembly, any replacement of the hose should include protection. Maintenance and cleaning systems Today’s hydraulic systems are very performant, and these systems are known for using tight tolerances. Before you decide to remove the hose from the machine, we recommend making sure that the hose is free of any oil and/or debris. When you spray the hose, you will reduce the chance of dust and dirt entering the port. It is very important to ensure that the system will not be contaminated during the removal and replacement of hydraulic hoses. When you replace parts in the equipment, it is important not to expose any parts for a long time. Because every working environment is different, there will be no one-size-fits-all cleaning strategy, but there should be a cleaning and maintenance strategy that everyone follows. With proper inspections, strategies, and preventive maintenance programs, you can reduce the number of replacements and downtime caused by hose failures.