.png?imageView2/2/format/jp2)
English
简体中文
BSP Thread Fittings Manufacturers introduce the installation details of hose fittings:
(1) The hose cannot be bent excessively or at the root when it is moving or stationary, at least at 1.5 times its diameter.
(2) When the hose moves to the extreme position, it should not be pulled too tightly, and should be relatively loose.
(3) Try to avoid torsional deformation of the hose.
(4) The hose should be kept as far away as possible from the heat radiation components, and a heat shield should be installed if necessary.
(5) External damage to the hose should be avoided, such as long-term friction on the surface of the same component during use.
(6) If the rubber hose is excessively deformed due to its own weight, there should be support parts.
