Hydraulic Fittings is a very broad term. Hydraulic filter element is also one of them. A hydraulic filter element is used to recreate the turbine oil that cannot be cleaned and solved and is very acidic in the oil exceeding the standard. Tell me what characteristics it has.

1. Use three-stage filtering to add molecular structure adsorption technology, and filter element (imported filter material) to gradually encrypt data to ensure filtering precision.

2. The use of Japanese ultra-low temperature oil solves the technical problem of removing molecular structure water so that the micro water in the oil can be completely removed.

3. Coalescer oil-water separator and three-dimensional small compound three-dimensional flash evaporation make de-drying more efficient and more complete.

4. The anti-cleaning equipment can ensure the continuity of the work and avoid the complexity and damage caused by manual service cleaning of the filter element.

5. The polymer material permanent magnet material filter element can not only reasonably break the emulsion, but also absorb the particle residues in the oil so that the refined oil after cleaning is cleaner, and the cleanliness can reach the NAS6 level.

6. Select a separate product oil reprocessing equipment to reasonably absorb the acid, alkali, and optically active chemicals in the oil.

7. The heating components of airline materials ensure that the refined oil is evenly heated and prevent carbonization; the digital display intelligent thermostat gets rid of the shortcomings of the traditional compass temperature controller that only has one heating point, and can be heated at 0 ~ 100 ℃ The upper and lower limits can be set at will, and the real-time temperature of the refined oil can be displayed more visually.

8. Fully automatic feeding, leaking, and balancing of oil quantity; setting up safeguards such as overvoltage, overcurrent, load, and anti-aircraft burning.

9. The entire equipment is interlocked and operated online for more than 200 hours.