.png?imageView2/2/format/jp2)
English
简体中文
Hydraulic Fittings Company describes the storage precautions for hydraulic fittings:
1. In the production and processing of hydraulic pumps, it is usually necessary to prefabricate the pumps. When not in use, the parts of the hydraulic pump are usually storage shelves, and the placement device is used for storage and transportation, but the existing ordinary carts have a simple structure. , Hydraulic fittings metal products are generally heavier. Therefore, there are several points that you need to pay attention to when storing hydraulic accessories.
2. It is inconvenient to lift in the process of storage and transportation, and it is easy to cause large collisions, easy to cause damage, and generate large noises, which brings inconvenience to the storage and handling of hydraulic pump accessories.
3. The portable hydraulic accessories storage device includes a base and a frame, a movable wheel is installed under the base, a tray is set above the frame, a rubber gasket is installed in the tray, and a movable wheel is installed in the wheel frame, and a rubber gasket is installed on the outer surface of the movable wheel, The racks on both sides are provided with side limit plates.
4. The front and rear sides of the frame are provided with movable limit blocks, and the inner side of the movable limit block is provided with a rubber plate, so the outer side of the frame is provided with a movable support rod, the support rod is provided with a support spring, and the outer side of the support sleeve rod is provided with a positioning hole. Internal setting pin.
